SIMATIC IOT2000 – For a simply integration into your existing plant

The SIMATIC IOT2000 is the reliable open platform for collecting, processing and transferring data in the production environment. It is ideally suited as gateway between the cloud or the company IT level and production. It also transfers analyzed data from the cloud to the production control. This continuous data communication closes the control loop for optimization of production.

IOT2000 Input/Output Module provides IOT2000 system with a variety of standard industrial input/output interface, which can provide customers with more applications.

Depending on the industrial area of application, this module has five digital inputs, two analog inputs and two digital outputs. Therefore it allows the direct connection of non-time-critical sensor data to the SIMATIC IOT2000.

The product features of the SIMATIC IOT2000 input/output module:

Interfaces:
ARDUINO GPIO (I2C and SPI free)
Digital Input 5 x DI (24V)
   Speed of DI 20 Hz, delay < 1.5 ms
   Electrical    isolation Yes
Digital outputs 2 x DO
   Type Transistor
   Electrical    isolation Yes
   Short-circuit    protection Yes, 1A
   Speed 10 Hz
Analog inputs 2 x AI (0 … 10 V or 0 … 20 mA can be selected)
   Resolution 9-bit
   Electrical isolation

Tehnical features of the SIMATIC IOT2020/2040 modules:

Technical specificatons: IOT 2020: IOT 2040:
Processor Intel Quark x1020 Intel Quark x1020
Mass data storage microSD Card slot; SDHC up to 32 GB; microSD Card not included in scope of supply microSD Card slot; SDHC up to 32 GB; microSD Card not included in scope of supply
Memory: RAM / Flash / SRAM 512 MB / 8 MB / 256 kB 1 GB / 8 MB / 256 kB
Interfaces 1x USB controller + 1x device; 1x 10/100 Ethernet RJ45 2x RS232/422/485 (switchable);1x USB controller + 1x device;2x 10/100 Ethernet RJ45(independent)
Expansion slots Arduino Uno R3 compatible; 1x mPCIe Full Size Arduino Uno R3 compatible; 1x mPCIe Full Size
Power supply 24VDC 24VDC
Dimensions (L x W x H) 144 x 90 x 53 (mm) 144 x 90 x 53 (mm)